Preface - Raven SBGuidance Auto Installation Manual

SBGuidance Auto I Rev. A I Claas ATP Ready

Preface

This installation manual is intended for persons responsible for installing a Claas ATP Ready set. The
manual contains important instructions that should be complied with when commissioning, operating
and servicing the SBGuidance system.
This manual has been compiled with the utmost care. SBG Precision Farming assumes no responsibility
for any errors or omissions in this document.
Any comments or questions can be sent to service-eu@ravenind.com.
SBG Precision Farming or any of its suppliers will accept no liability for physical or material
damage caused whilst using the SBGuidance system.
The installed SBG system produces less than 70dB (A) noise.
This user guide uses a number of concepts for extra attention to a few things:
Tip!:
Provides recommendations on how certain
activities can be performed much easier.
Please note!:
Indicates certain problems that the user
should take note of.
Caution!:
Indicates that the machine can be damaged.
Warning!:
Indicates a risk of injury.
Pag 5/33 I SBG-Claas ATP Ready-IM-EN-Rev. A