Chapter 3 Installation; Fabricate The Vsn® Unit Bracket; Vsn® Specifications; Mounting - Raven VSN Installation Manual

CHAPTER
3
FABRICATE THE VSN® UNIT BRACKET
1. Assemble the VSN® Unit subassembly as pictured in Figure 1, "VSN® Unit Subassembly," below.
FIGURE 1. VSN® Unit Subassembly
M8 Hardware
(Bolt, Lock
Washer, Washer
Rubber Isolator)
VSN® SPECIFICATIONS
The following sections offer specifications for the VSN camera (P/N 063-0174-045).

MOUNTING

HEIGHT
• 72"-84" (183-213 cm)
• Measured with the machine level, from the ground to the center of the camera lens
FIGURE 2. Mounting Height Diagram
Installation: fabricate the vsn® unit bracket
I NSTALLATION
C H A P T E R 3
Rubber Isolator
9