Page 1
7.5 kVA - 15 kVA UPS Parallel for Redundancy System Users and Installation Manual...
Page 3
7.5 kVA - 15 kVA UPS Parallel for Redundancy System Users and Installation Manual 1012833 Revision 4...
Page 4
Copyright 1998 The contents of this manual are the copyright of the publisher and may not be reproduced (even extracts) unless permission granted. Every care has been taken to ensure the accuracy of the information contained in this manual, but no liability can be accepted for any errors or omission.
1. Introduction 2. System description 2.1 General description 1012833 7.5 kVA - 15 kVA UPS Revision 4 Parallel for Redundancy System User’s and Installation Manual...
Page 6
Fig. 1. Block diagram of the parallel for redundancy system 7.5 kVA - 15 kVA UPS 1012833 Parallel for redundancy System Revision 4 User’s and Installation Manual...
2.2 System configuration 1012833 7.5 kVA - 15 kVA UPS Revision 4 Parallel for Redundancy System User’s and Installation Manual...
Page 8
Fig. 3. Dimensions of one UPS and the parallel module. 7.5 kVA - 15 kVA UPS 1012833 Parallel for redundancy System Revision 4 User’s and Installation Manual...
3. Safety information Storage and transportation Installation WARNING! User operations 1012833 7.5 kVA - 15 kVA UPS Revision 4 Parallel for Redundancy System User’s and Installation Manual...
4. Shipping and storage 5. Unpacking and handling 5.1 Unpacking and incoming inspection 7.5 kVA - 15 kVA UPS 1012833 Parallel for redundancy System Revision 4 User’s and Installation Manual...
Page 11
Removing the UPS from pallet Fig. 4. Removing the UPS from pallet 5.2 Moving 1012833 7.5 kVA - 15 kVA UPS Revision 4 Parallel for Redundancy System User’s and Installation Manual...
6.3 Power connections WARNING! Fig. 5a. Removing the front panels and opening the left side panel. 1012833 7.5 kVA - 15 kVA UPS Revision 4 Parallel for Redundancy System User’s and Installation Manual...
External battery connections 7. Computer and alarm connections NOTE Connecting the UPS to a computer RS232 serial data interfaces 7.5 kVA - 15 kVA UPS 1012833 Parallel for redundancy System Revision 4 User’s and Installation Manual...
Page 19
Table 4. RS232 connection (X100) for the computer, 9-pin female D-sub. i r r Table 5. RS232 connection (X101) for the modem, 9-pin male D-sub. Potential free relay interface u l i u l i e t t e t t e t t Fig.
Emergency Power Off Input Generator On Input External Bypass Switch Input Remote Output On/Off Input 7.5 kVA - 15 kVA UPS 1012833 Parallel for redundancy System Revision 4 User’s and Installation Manual...
Page 21
Environment Alarm Input 8. Users guide to operations 8.1 Starting up the Parallel for redundancy system Starting up the UPS *) If the UPSes are necessary to start up the parallel system with the maintenance bypass switch in BYPASS position, turn the parallel system to the normal operation mode according to the section 8.4 of this manual.
8.2 Shutting down a UPS Shutting down procedure: 8.3 Control panel functions Fig.10. Control panel 1012833 7.5 kVA - 15 kVA UPS Revision 4 Parallel for Redundancy System User’s and Installation Manual...
Page 24
Operating switches 8.4 Using the maintenance bypass switch of the parallel module 7.5 kVA - 15 kVA UPS 1012833 Parallel for redundancy System Revision 4 User’s and Installation Manual...
WARNING! Going to bypass mode Returning the normal mode 9. Maintenance 9.1 Using the parallel module switches 1012833 7.5 kVA - 15 kVA UPS Revision 4 Parallel for Redundancy System User’s and Installation Manual...
HhvrhprÃihÃvpuÃT" HhvrhprÃvpuÃT HhvrhprÃvpuÃT! Fig. 11. Control switches of the parallel module Battery maintenance Scrapping the UPS WARNING! 10. Warranty 7.5 kVA - 15 kVA UPS 1012833 Parallel for redundancy System Revision 4 User’s and Installation Manual...
Need help?
Do you have a question about the 9305 and is the answer not in the manual?
Questions and answers