Table of Contents
Advertisement
Server switches itself off
7.2
Server switches itself off
Server Management has detected an error
Ê In the ServerView program, check the error list or check the ErrorLog file
using the SCU utility, and attempt to eliminate the error.
7.3
Screen remains blank
Monitor is switched off
Ê Switch on your monitor.
Screen has been blanked
Ê Press any key on the keyboard.
or
Ê Deactivate screen blanking (screen saver), and enter the appropriate
password when necessary.
Brightness control is set to dark
Ê Set the brightness control to light. For detailed information, please refer to
the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê Switch off the monitor and the server.
Ê Check whether the power cable is properly connected to the monitor and to
the power outlet.
Ê Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, then the monitor cable must be connected to the
graphics card.
Ê Switch on the monitor and the server.
54
Troubleshooting and tips
U41147-J-Z156-2-76
Advertisement
Table of Contents
