Table of Contents
Advertisement
Important notes
Modules with electrostatic-sensitive components:
Systems and components which might be damaged by electrostatic discharge
(ESD) can be marked with the following label:
Figure 1: ESD label
When handling boards fitted with electrostatic-sensitive components, always
observe the following precautions:
You must always discharge yourself (e.g. by touching a grounded object)
before working.
The equipment and tools you use must be free of static charge.
Pull out the power plug before inserting or pulling out boards.
Always hold boards by their edges.
Never touch pins or conductors on boards.
Other important points:
When cleaning the server, observe the relevant notes in the section
"Cleaning the server" on page 46.
Keep this operating manual and all additional documentation (e.g. technical
manual, CD) in a safe place together with the device. If you pass on the
device to third parties, you should also pass on the complete documentation.
U41147-J-Z156-2-76
Safety
17
Advertisement
Table of Contents
