Notational Conventions - Fujitsu PRIMERGY H200 Manual

Notational conventions

Statistics for service technicians (operating hours counter, counter for
switch-on/switch-off cycles)
Storage of error messages in the non-volatile SRAM memory
Further information on the ServerView server management is provided in the
associated documentation (see chapter "Related publications" on page 131).
ServerStart
You can configure the PRIMERGY server quickly and with precision using the
ServerStart software provided. User-guided menus are available for installing the
server operating systems.
Service and Support
PRIMERGY servers are service-friendly and modular, thus enabling quick and
simple maintenance. The flash EPROM program supplied with the FSC utilities
supports fast BIOS update. With the optional Remote Test and Diagnostic
System RemoteView, long-distance maintenance and service (remote) can also
be performed on servers of the PRIMERGY series.
1.2 Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
V
CAUTION!
Ê
Text in italics
"Quotation marks"
I
Table 1: Notational conventions
4
Pay particular attention to text marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system, or lead to loss of data.
Text which follows this symbol describes activities that
must be performed in the order shown.
indicates commands or menu items.
indicate names of chapters and terms that are being
emphasized.
This symbol is followed by supplementary information,
remarks, and tips.
Introduction
U41147-J-Z156-2-76