Table of Contents
Advertisement
Appendix
Figure 63: Installing the cages
Ê Turn the cages 90° to the left.
Ê Push the cage with the floppy disk drive and the LCD control panel into the
holder (1). Push the cage with the chipcard reader into the holder (2) of the
system unit.
Ê Connect the device cables to the corresponding connector. Refer to the
table in figure 62 on page 116 for assistance.
Ê Mount the slot cover (see chapter "Opening and closing the server" on
page 47).
U41147-J-Z156-2-76
Converting a floorstand model into a rack model
117
Advertisement
Table of Contents
