9
SCSI configurations
All devices attached to the SCSI port or a SCSI controller (hard disk drives and
other drives) must have a unique address, known as the SCSI ID. When
attaching drives, make sure you do not allocate an ID which has already been
assigned.
9.1
1.6-inch hard disk subsystems
9.1.1
Addresses for SCSI devices
The SCSI IDs for the 5¼-inch mounting locations are set on the drive. For the
5¼-inch drives, the SCSI IDs 4 through 6 are recommended.
Figure 44: SCSI addresses for 1.6-inch hard disk subsystems
a = accessible 5¼-inch drives
(SCSI IDs 4 to 6 freely selectable)
b = SCSI hard disk drives
All the necessary SCSI terminations are already installed on the server. No
terminations may be plugged into the drives.
U41147-J-Z156-2-76
c =
1-channel version
d = 2-channel version
91