Removing/Mounting The Slot Cover - Fujitsu PRIMERGY H200 Manual

Removing/mounting the slot cover

5.4 Removing/mounting the slot cover
Remove the slot cover when, for example, you require access to the slots or
wish to install or remove the RemoteView medium.
V
CAUTION
Before you remove the slot cover, the server must be switched off and
the power plug pulled out; otherwise, the safety switch will switch off the
server when the slot cover is removed.
Figure 17: Removing the slot cover
Ê Loosen the knurled screw (1).
Ê Use the recessed grips (a) to push the slot cover to the rear (2).
Ê Lift the slot cover off the housing in the direction (3) indicated by the arrow.
Mounting is done in the reverse order.
50
Opening and closing the server
U41147-J-Z156-2-76