Table of Contents
Advertisement
Opening and closing the server
5.3
Removing/mounting side cover
If you wish to install or remove extension boards (graphics controller, SCSI
controller, network controller, etc.), to make changes to the processor or base
memory configuration or to replace fans, then remove the left side cover.
Figure 16: Removing the side cover
Ê Remove the side cover by lifting it upward (1).
Mounting is done in the reverse order.
I
Make sure that the side fits into the gap between the base of the housing
and the housing itself.
U41147-J-Z156-2-76
Removing/mounting side cover
49
Advertisement
Table of Contents
