Instructions On Connecting And Disconnecting Cables - Fujitsu PRIMERGY H200 Manual

Instructions on connecting and disconnecting cables

3.7 Instructions on connecting and
disconnecting cables
V
CAUTION!
Be sure to read the documentation on the external devices before
connecting them.
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug body. Never unplug a cable by pulling
the cable itself!
Connect and disconnect the cables in the order described below.
Connecting cables
Ê Turn off all power and equipment switches.
Ê Pull all power plugs out of the grounded power outlets.
Ê Plug all cables into the server and peripherals.
Ê Plug all data communication cables into the utility sockets.
Ê Plug all power cables into the grounded power outlets.
Disconnecting cables
Ê Turn off all power and equipment switches.
Ê Pull all power plugs out of the grounded power outlets.
Ê Unplug all data communication cables from the utility sockets.
Ê Disconnect the relevant cables at the server and at the peripherals.
36
Installation
U41147-J-Z156-2-76