Table of Contents
Advertisement
Converting a rack model into a floorstand model
Figure 67: Mounting the intrusion switch
Ê Fasten the two fastening screws (1) which attach the base plate of the switch
to the assembly frame.
Ê Reach through the CD drive cage aperture, and connect the intrusion switch
cable to the connector X100 on the power backplane (2) (behind the hard
disk drive cage; see figure 58 on page 114).
Ê Mount the slot cover (see chapter "Opening and closing the server" on
page 47).
Figure 68: Mounting the floor stands
122
Appendix
U41147-J-Z156-2-76
Advertisement
Table of Contents
