Table of Contents
Advertisement
Converting a floorstand model into a rack model
Ê Pull the cage with the floppy disk drive and the front panel out of the system
unit (1). See section "Installing/removing the floppy disk drive" on page 123.
Ê Disconnect the data cable (see also figure 75 on page 128) from the
chipcard reader, and pull the cage out of the server (2).
Front view
X70
security switch
X100
intrusion switch
X150
chassis ID
X130
STM/LVD module
X60
power supply accessible drives
X61; X62
power supply SCSI backplanes
X17
power supply floppy disk drive
Rear view
X6
LCD control panel
Figure 62: Connector designation on the power backplane
116
Appendix
U41147-J-Z156-2-76
Advertisement
Table of Contents
