Downloading The Firmware - CyberData InformaCast Enabled 011407 Operation Manual

2.4 Upgrade the Firmware and Reboot the InformaCast
Enabled Loudspeaker Amplifier (PoE)

2.4.1 Downloading the Firmware

To download the firmware to your computer:
1. Download the latest firmware file from the Downloads tab at the following webpage:
2. Unzip the firmware version file. This file may contain the following:
•
•
3. Log in to the home page as instructed in
4. Click on the Firmware menu button to open the Firmware page. See
CyberData InformaCast Enabled
v12.0.3
5. Click on the Browse button, and then navigate to the location of the firmware file.
6. Select the firmware file.
7. Click on the Upload button.
Note
Operations Guide
https://www.cyberdata.net/products/011407
Firmware file
Release notes
Caution
Equipment Hazard: CyberData strongly recommends that you first reboot the
device before attempting to upgrade the firmware of the device. See
"Reboot the
GENERAL ALERT
Figure 2-48. Firmware Page
Paging Amplifier
Do not reboot the device after clicking on the Upload button.
Installing the InformaCast Enabled Loudspeaker Amplifier (PoE)
InformaCast Enabled Loudspeaker Amplifier (PoE) Setup
Section 2.3.4, "Log in to the Home
Device".
931277I
Page".
Figure 2-48.
Section 2.4.2,
CyberData Corporation
101