2.4 Upgrade the Firmware and Reboot the SIP
Loudspeaker Amplifier (PoE)
2.4.1 Downloading the Firmware
Operations Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
To download the firmware to your computer:
1. Download the latest firmware file from the Downloads tab at the following webpage:
http://www.cyberdata.net/voip/011405/
2. Unzip the firmware version file. This file may contain the following:
•
Firmware file
•
Release notes
3. Log in to the home page as instructed in
Page".
4. Click on the Firmware menu button to open the Firmware page. See
Caution
Equipment Hazard: CyberData strongly recommends that you first reboot the
device before attempting to upgrade the firmware of the device. See
"Reboot the
GENERAL ALERT
Figure 2-42. Firmware Page
CyberData Paging Amplifier
v11.6.2
5. Click on the Browse button, and then navigate to the location of the firmware file.
6. Select the firmware file.
7. Click on the Upload button.
Note
Do not reboot the device after clicking on the Upload button.
Section 2.3.4, "Log in to the Configuration Home
Device".
931236C
SIP Loudspeaker Amplifier (PoE) Setup
Downloading the Firmware
Figure
2-42.
Section 2.4.2,
CyberData Corporation
84
Need help?
Do you have a question about the 011405 and is the answer not in the manual?
Questions and answers