Downloading The Firmware - CyberData 011403 Operation Manual

2.4 Upgrade the Firmware and Reboot the InformaCast
Enabled Paging Amplifier

2.4.1 Downloading the Firmware

To download the firmware to your computer:
1. Download the latest firmware file from the Downloads tab at the following webpage:
2. Unzip the firmware version file. This file may contain the following:
•
•
•
3. Log in to the Home page as instructed in
4. Click on the Firmware menu button to open the Firmware page
Note
CyberData InformaCast SIP
5. Click on the Browse button, and then navigate to the location of the firmware file.
Operations Guide
https://www.cyberdata.net/products/011403
Firmware file
Release notes
Autoprovisioning template
CyberData strongly recommends that you do not upgrade the firmware when the device is
likely to be in use.
Figure 2-44. Firmware Page
Paging Amp
Installing the InformaCast Enabled Paging Amplifier
Section 2.3.4, "Log in to the Home
931976A
InformaCast Enabled Paging Amplifier Setup
Page".
(Figure 2-44).
CyberData Corporation
88