Downloading The Firmware - CyberData 011404 Operation Manual

2.4 Upgrade the Firmware and Reboot the SIP
Loudspeaker Amplifier (AC-Powered)

2.4.1 Downloading the Firmware

To download the firmware to your computer:
1. Download the latest firmware file from the Downloads tab at the following webpage:
2. Unzip the firmware version file. This file may contain the following:
•
•
3. Log in to the home page as instructed in
4. Click on the Firmware menu button to open the Firmware page. See
CyberData Paging Amplifier
v12.0.3
5. Click on the Browse button, and then navigate to the location of the firmware file.
6. Select the firmware file.
7. Click on the Upload button.
Note
Operations Guide
https://www.cyberdata.net/products/011404
Firmware file
Release notes
Caution
Equipment Hazard: CyberData strongly recommends that you first reboot the
device before attempting to upgrade the firmware of the device. See
"Reboot the
GENERAL ALERT
Figure 2-56. Firmware Page
Do not reboot the device after clicking on the Upload button.
Installing the SIP Loudspeaker Amplifier (AC-Powered)
SIP Loudspeaker Amplifier (AC-Powered) Setup
Section 2.3.4, "Log in to the Home
Device".
931240M
Page".
Figure 2-56.
Section 2.4.2,
CyberData Corporation
104