CyberData InformaCast Enabled 011407 Operation Manual page 53

Installing the InformaCast Enabled Loudspeaker Amplifier (PoE) 45
InformaCast Enabled Loudspeaker Amplifier (PoE) Setup
Table 2-10. Device Page Parameters (continued)
Web Page Item Description
Use this button to preview the strobe flashing behavior for the Singlewire
Broadcast Strobe Settings.
Click on the Test Audio button to do an audio test. When the Test Audio
button is pressed, you will hear a voice message for testing the device
audio quality and volume.
Click on the Test Relay button to do a relay test.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the
web page items. First click on the Toggle Help button, and you will see a
question mark ( ) appear next to some of the web page items. Move the
mouse pointer to hover over a question mark to see a short description of
a specific web page item.
Operations Guide 931277I CyberData Corporation