Informacast Enabled Loudspeaker Amplifier (Poe) Jumpers; Ethernet Connection - CyberData InformaCast Enabled 011407 Operation Manual

2.2.10 InformaCast Enabled Loudspeaker Amplifier (PoE) Jumpers

See
JP4
JP5
See
Jumper
JP1
JP2
JP3
JP4
JP5

2.2.11 Ethernet Connection

See
Connection
Ethernet
Operations Guide
Figure 2-16 for the jumper locations.
Figure 2-16. Jumper Locations
Table 2-4 for the jumper descriptions.
Description
Reset—Factory Only
RTFM (not installed)
Audio Enable Jumper—Factory Only
Relay NO/NC (default to NO)—Factory Only
PoE IEEE 802.3at—Factory Only
Table 2-5 for details about the InformaCast Enabled Loudspeaker Amplifier (PoE) connection.
Table 2-5. InformaCast Enabled Loudspeaker Amplifier (PoE) Connection
Connection Details
Use a RJ 45 cable.
Installing the InformaCast Enabled Loudspeaker Amplifier (PoE)
InformaCast Enabled Loudspeaker Amplifier (PoE) Setup
JP3
JP1
Table 2-4. Jumper Descriptions
931277I
J9
Location
InformaCast Enabled
Loudspeaker Amplifier (PoE)
CyberData Corporation
25
JP2