CyberData InformaCast Enabled 011407 Operation Manual page 77

2. On the SSL page, enter values for the parameters indicated in
Note
Web Page Item
Server CAs
Client Certificate
Client CA
Test SSL Connection
Server
Port
List of Trusted CAs
Operations Guide
The question mark icon (
after the Toggle Help button is pressed
Table 2-19. SSL Configuration Parameters
Description
Use this button to select a configuration file to import.
Click Browse to select a CA certificate to import. After selecting a server
certificate authority (CA), click Import CA Certificate to import it to the list of
trusted CAs. CAs are used to validate the certificate presented by the server
when establishing a TLS connection.
Restore Defaults will restore the default list of registered CAs and Remove All
will remove all registered CAs.
Restore Defaults will restore the default list of registered CAs and Remove All
will remove all registered CAs.
Reboots the device and applies settings and activates imported certificates.
Click on the Toggle Help button to see a short description of some of the web
page items. First click on the Toggle Help button, and you will see a question
mark ( ) appear next to some of the web page items. Move the mouse pointer
to hover over a question mark to see a short description of a specific web page
item.
When doing mutual authentication this device will present a client certificate with
these parameters.
Right click and Save Link As... to get the Cyberdata CA used to sign this client
certificate.
The ssl test server address as a fully qualified domain name or in IPv4 dotted
decimal notation.
The ssl test server port. The supported range is 0-65536. SIP connections over
TLS to port 5060 will do the same.
Use this button to test a TLS connection to a remote server. This will attempt to
make a socket connection to the configured test server and port and report the
success or failure. This can be used to debug TLS connection issues separate
from SIP registration issues.
Provides details of the certificate. After clicking on this button, the Certificate
Info Window appears. See
Removes this certificate from the list of trusted certificates. After clicking on this
button, the Remove Server Certificate Window appears. See
"Remove Server Certificate
931277I
Installing the InformaCast Enabled Loudspeaker Amplifier (PoE)
InformaCast Enabled Loudspeaker Amplifier (PoE) Setup
) in the following table shows which web page items will be defined
.
Section 2.3.9.1, "Certificate Info
Window".
Table 2-19.
Window".
Section 2.3.9.2,
CyberData Corporation
69