CyberData InformaCast Enabled 011407 Operation Manual page 98

2. On the Autoprovisioning page, you may enter values for the parameters indicated in
Note
Disable Autoprovisioning
Autoprovisioning Server
Autoprovisioning Filename
Use tftp
Verify Server Certificate
Username
Password
Autoprovisioning Autoupdate 
(in minutes)
Autoprovision at time (HHMMSS)
Autoprovision when idle
(in minutes > 10)
Operations Guide
23.
The question mark icon (
after the Toggle Help button is pressed
Table 2-23. Autoprovisioning Page Parameters
Web Page Item
Installing the InformaCast Enabled Loudspeaker Amplifier (PoE)
InformaCast Enabled Loudspeaker Amplifier (PoE) Setup
) in the following table shows which web page items will be defined
.
Prevent the device from automatically trying to download a
configuration file. See
more information.
Enter the IPv4 address of the provisioning server in dotted
decimal notation.
The autoprovisioning filename is the configuration filename.
The default autoprovisioning filename is in the format of
<mac address>.xml.
Supported filename extensions are .txt, and .xml. The current
filename is denoted by an asterisk at the bottom of the
Autoprovisioning
A file may have any name with an xml extension. If a file
name is entered, the device will look for the specified file
name, and only that file.
The device will use TFTP (instead of http) to download
autoprovisioning files.
When using ssl to download autoprovisioning files, reject
connections where the server address doesn't match the
server certificate's common name.
The username used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
The password used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
The reoccurring time (in minutes) the device will wait before
checking for new autoprovisioning files. Enter up to 6 digits. A
value of 0 will disable this option.
Note: To use the auto update options, enable the
with NTP Server on boot
page (see Table
The time of day the device will check for a new
autoprovisioning file. The time must be 6 characters in length
and in HHMMSS format. An empty value will disable this
option.
Note: To use the auto update options, enable the
with NTP Server on boot
page (see Table
The idle time (in minutes greater than 10) after which the
device will check for a new autoprovisioning file. Enter up to 6
digits. A value of 0 will disable this option.
Note: To use the auto update options, enable the
with NTP Server on boot
page (see Table
931277I
Description
Section 2.3.13.1, "Autoprovisioning"
Page. Enter up to 256 characters.
setting on the
2-10).
setting on the
2-10).
setting on the
2-10).
CyberData Corporation
90
Table 2-
for
Set Time
Device Page
Set Time
Device Page
Set Time
Device Page