Adjust The Volume - CyberData InformaCast Enabled 011407 Operation Manual

2.2.16 Adjust the Volume

There are two ways to adjust the volume for the InformaCast Enabled Loudspeaker Amplifier (PoE):
•
•
2.2.16.1 The SIP Volume
To adjust the volume of the device with the
following steps:
1. Go to the
2. Select the
3. In the
4. Select Save.
2.2.16.2 The Multicast Volume
To adjust the
complete the following steps:
1. Go to the
2. Select the
3. In the
4. Select Save.
Operations Guide
The SIP Volume setting on the
The external Volume dial
(PoE) face
Figure 2-20. External Volume Dial
Setting
Home Page.
Device Page page.
SIP Volume box, type a number between 0 (lowest) and 9 (highest).
Setting
Multicast Volume volume with the
Home Page.
Device Page.
Multicast Volume box, type a number between 0 (lowest) and 9 (highest).
931277I
Installing the InformaCast Enabled Loudspeaker Amplifier (PoE)
InformaCast Enabled Loudspeaker Amplifier (PoE) Setup
Device Page
(Figure 2-21) on the InformaCast Enabled Loudspeaker Amplifier
Volume
SPD
PWR Status
SIP Volume setting on the
Multicast Volume
External volume dial
Device Page, complete the
setting on the Device Page,
CyberData Corporation
29