Electrocution Hazards - JLG E300AJ Operation And Safety Manual

• Enter and exit only through gate area. Use extreme caution
when entering or leaving platform. Ensure that the platform
assembly is fully lowered. Face the platform when entering or
leaving the platform. Always maintain "three point contact"
with the machine, using two hands and one foot or two feet
and one hand at all times during entry and exit.
• Keep both feet firmly positioned on the platform floor at all
times. Never position ladders, boxes, steps, planks, or similar
items on unit to provide additional reach for any purpose.
• Keep oil, mud, and slippery substances cleaned from footwear
and the platform floor.
31215000
SECTION 1 - SAFETY PRECAUTIONS

Electrocution Hazards

• This machine is not insulated and does not provide protection
from contact or proximity to electrical current.
1-5