The Centre Section; Master Bus Controls - Solid State Logic Matrix2 Delta Owner's Manual

Chapter 3 - Analogue Signal Flow

The Centre Section

Master Bus Controls

The master controls for the mix, record, cue and FX busses are found in the top right corner of the Matrix centre section. Each
bus has its own gain pot with a Total Recall LED. The gain pots trim the signal by ±24dB and are indented in the centre at unity
gain.
The Mix Bus
The MIX bus has its own dedicated insert circuit which is separate from the channel routing in the Insert
Matrix. The INSERT button below the gain trim routes the bus through the MIX INS SEND and RTN
connections. By default, the return from the insert will then feed the main bus output. However, the summing
(Y) button below the INSERT
2SXI XLEX TVIWWMRK XLI
XLI QM\ FYW WMPIRX YRPIWW XLI Y FYXXSR MW WIPIGXIH
2SXI EPWS XLEX MJ XLI 1-< -27 7)2( ERH 682 GSRRIGXMSRW EVI RSX VIUYMVIH JSV WMKREP TVSGIWWMRK TVIWWMRK XLI
Y FYXXSR IREFPIW XLI VIXYVR GSRRIGXMSRW XS FI YWIH EW E HMVIGX WXIVIS MRTYX XS XLI FYW
The Record Bus
The REC bus has its own dedicated insert circuit which is isolated from the channel routing in the InsertMatrix.
The INSERT button below the gain trim routes the bus through the REC INS SEND and RTN connections.
By default, the return from the insert will then feed the main bus output. However, the summing (Y) button
below the INSERT button sums the insert return and the original bus feed together.
2SXI XLEX TVIWWMRK XLI
XLI VIGSVH FYW WMPIRX YRPIWW XLI Y FYXXSR MW WIPIGXIH
2SXI EPWS XLEX MJ XLI 6)' -27 7)2( ERH 682 GSRRIGXMSRW EVI RSX VIUYMVIH JSV WMKREP TVSGIWWMRK TVIWWMRK XLI Y
FYXXSR IREFPIW XLI VIXYVR GSRRIGXMSRW XS FI YWIH EW E HMVIGX WXIVIS MRTYX XS XLI FYW
The REC bus can be routed to the
The Cue ST Bus
The CUE ST bus has its own dedicated insert circuit which is isolated from the channel routing in the Insert
Matrix. The INSERT button below the gain trim routes the bus through the CUE INS SEND and RTN
connections. By default, the return from the insert will then feed the main bus output. However, the summing
button (Y) below the INSERT
2SXI XLEX TVIWWMRK XLI
XLI GYI FYW WMPIRX YRPIWW XLI Y FYXXSR MW WIPIGXIH
2SXI EPWS XLEX MJ XLI '9) -27 7)2( ERH 682 GSRRIGXMSRW EVI RSX VIUYMVIH JSV WMKREP TVSGIWWMRK TVIWWMRK XLI
Y FYXXSR IREFPIW XLI VIXYVR GSRRIGXMSRW XS FI YWIH EW E HMVIGX WXIVIS MRTYX XS XLI FYW
The bus can be routed to the
;LIR YWMRK XLI HIWO JSV XVEGO QM\HS[R WII 4EKI   XLI
The send signal can be auditioned on the main monitoring by pressing the
LED to the right of the button which lights to indicate that
37
Matrix 2 Owner's Manual
button sums the insert return and the original bus feed together.
INSERT FYXXSR [MXLSYX ER]XLMRK GSRRIGXIH XS XLI 1-< -27 7)2( ERH 682 [MPP PIEZI
INSERT FYXXSR [MXLSYX ER]XLMRK GSRRIGXIH XS XLI 6)' -27 7)2( ERH 682 [MPP PIEZI
MIX bus by pressing the
button sums the insert return and the original bus feed.
INSERT FYXXSR [MXLSYX ER]XLMRK GSRRIGXIH XS XLI '9) -27 7)2( ERH 682 [MPP PIEZI
MIX bus by pressing the
button below the Y button.
TO MIX
button below the Y button.
TO MIX
CUE ST FYW QYWX FI VSYXIH XS XLI
AFL button below the
AFL is on. (See Page 39 for more on AFLs.)
MIX FYW
TO MIX button. There is an