Chapter 3 - Analogue Signal Flow
Auto Soft Keys
8LI ½VWX XLVII WSJX OI]W MR XLI
analogue channel levels to be controlled via MIDI Volume
(CC7) messages received from a DAW or other external
MIDI controller. By creating additional MIDI tracks in
the workstation the analogue channels can be automated
using faders in the DAW layer as MIDI controllers for the
matrix channels and writing volume automation data into
XLI (%; TVSNIGX 8LIWI WSJX OI]W EVI GLERRIPWTIGM½G
affecting the channel(s) selected using the upper
None
Selecting
disables external MIDI control, giving full control of the fader level to the desk faders.
Abs
Selecting
disables the physical faders, giving full control of the fader level from received MIDI volume data.
Trim
Selecting
enables simultaneous control from both the MIDI data and the physical faders, allowing the received MIDI volume
messages to trim the channel level set by the console faders in Analogue Focus mode. The last three soft keys in the
are functions of the A-FADA mode, where the DAW is controlled by audio tracks within the DAW.
The Automation status of each channel (None,
8LIWI WSJX OI]W HS RSX VIQEMR PMX SRGI XLI] EVI VIPIEWIH 8LIMV WXEXYW MW MRHMGEXIH F] XLI
7II 4EKI JSV QSVI HIXEMPW
DF1
Selecting
enables the A-FADA method of automation.
JSPPS[ ER] ZSPYQI EYXSQEXMSR [VMXXIR SR XLI ½VWX EYHMS XVEGOW MR XLI (%; ]SY LEZI WIX YT SR 0E]IV
DF2
Selecting
enables the A-FADA method of automation.
JSPPS[ ER] ZSPYQI EYXSQEXMSR [VMXXIR SR XLI ½VWX EYHMS XVEGOW MR XLI (%; ]SY LEZI WIX YT SR 0E]IV
Snap
Selecting
restores the last known analogue channel fader positions you had set before one of the
and writes those positions into the DAW.
TR Soft Keys
TR
The
soft keys allow Matrix's Total Recall functions to be controlled from the console (TR is described on page 73):
Enable
enables TR for restoring snapshots.
TakeTR
takes a TR snapshot.
SetSel
sets a TR snapshot to any channels selected using the upper
SetAll
sets a TR to the whole console.
Cur:
displays the TR number which is currently selected in the
<<
selects the previous TR snapshot
>>
selects the next TR snapshot
8MT (SR´X JSVKIX XS TVIWW XLI )2%&0) FYXXSR EJXIV YWMRK XLI
47
Matrix
2
Owner's Manual
Auto
menu enable the
SEL
key.
Abs
or Trim) will be stored within each TR snapshot.
MonOpt
Mon
Meters
None
Abs
Trim
DF1
stands for
'DAW Follow
DF2
stands for
'DAW Follow
SEL
key.
Total Recall
tab of the Matrix Remote.
ERH "" FYXXSRW XS WLS[ XLI 86 WRETWLSX
Auto
TR
IP
Misc
DF1
AUTO
0)(W MR XLI GLERRIP QIXIVW
1'. The analogue channel faders now
2'. The analogue channel faders now
DF
buttons was pressed
Links
DF2
Snap
Auto
menu
Need help?
Do you have a question about the Matrix2 Delta and is the answer not in the manual?
Questions and answers