Ip Soft Keys; Misc Soft Keys - Solid State Logic Matrix2 Delta Owner's Manual

IP Soft Keys

IP
The soft keys allow you to switch the console's IP address between
The IP address information is shown after the
subnet mask set to 255.255.255.0.
7II 4EKI  JSV E HIWGVMTXMSR SJ LS[ XS GLERKI XLI ½\IH -4 EHHVIWW
7II 4EKI  JSV HIXEMPW SJ GSR½KYVMRK XLI GSRWSPI´W )XLIVRIX GSRRIGXMZMX]

Misc Soft Keys

Misc
The soft keys cover miscellaneous Matrix settings:
InpCut
GSR½KYVIW XLI GLERRIP
any pre-fader feeds from the channel unaffected. Pressing
muting any feeds from the channel that are not sourced from the INPUT.
OptDAC
switches between the two digital inputs. By default, the AES (XLR) input is selected. Pressing the
selects the S/PDIF input, and the button lights to indicate that this input has been selected.
Fader Options:
Mst+10
rescales the master fader. By default, the master fader reaches 0dB at the top, following the scaling labelled on the left of
Mst+10
the fader. Pressing
0dB Off
and move the analogue faders on any channels selected using the upper
ShowdB toggles display of the analogue fader levels in the scribble strips when in analogue focus mode.
Meter Signal Scale Option:
The default scale for all of the LED meters is meters is 0dBfs corresponds to an analogue level of +24dBu. The
provides an alternative scaling of +18dBu.
USB Keyboard Identifier:
KeybID
The key is used to identify the nationality of keyboard being emulated by the Matrix USB soft keys. See Page 4 for details.
DHCP
CUT buttons. By default, pressing the channel
switches the meter's scaling to reach +10dB at the top, following the labelling on the right of the fader.
Fixed
and
FYXXSR &] HIJEYPX 1EXVM\ YWIW E ½\IH -4 EHHVIWW SJ    [MXL XLI
InpCut
causes the CUT
Chapter 3 - Analogue Signal Flow
DHCP
.
CUT button mutes the channel output, leaving
buttons to mute the channel after the input,
'
SEL key to 0dB and -
Matrix 2 Owner's Manual
OptDAC
button
respectively.
+18dB
button
48