Step 6: Channel Control Of Your Daw - Solid State Logic Matrix2 Delta Owner's Manual

Chapter 2 - Getting Started

STEP 6: Channel Control of your DAW

In this step we will turn our attention to control of the DAW track.
³ Still on the Matrix console, press the
the channel fader. You will notice that the
button will light. Press the
³ Press the
notice that the
CUT
Notice that the
selected in the DAW.
³ Press the
SOLO button again to deactivate it.
³ Move the fader at the bottom of the Matrix channel. You will notice that the DAW's
³ Find the
SEL KEY area of the centre section, located below the
SELECT FYXXSRW 8LIWI FYXXSRW HI½RI XLI JYRGXMSR SJ XLI PS[IV
which is concerned with DAW control.
2SXI XLEX XLI SEL KEY
³ Ensure that all the
SEL KEY
press them to return to default mode.
In default mode, the lower
³ Press the
SEL key in the channel controlling the
DAW.
³ Press the left hand
SEL KEY
again. You will notice that this time you have record-armed the
7II 'LETXIV  JSV HIXEMPW SJ SXLIV MRGLERRIP (%; GSRXVSP JYRGXMSRW
23
Matrix 2 Owner's Manual
CUT
SOLO button in the channel controlling the
Test track will solo in the DAW. On Matrix, the channel
FYXXSRW MR EPP XLI SXLIV GLERRIPW [MPP ¾EWL
SOLO 0)( FIPS[ XLI QSRMXSVMRK WIGXMSR MW ¾EWLMRK MRHMGEXMRK XLEX XLIVI MW E WSPS FYXXSR
QSHIW LEZI RSXLMRK XS HS [MXL XLI YTTIV EREPSKYI
buttons are unlit, indicating that the lower
SEL keys function as DAW track selectors:
button marked REC ARM
CUT button in the channel controlling the
Test track will cut in the DAW. On Matrix, the channel
button again to deactivate it.
Test
DAW LAYER
SEL
SEL
Test track. You will notice that you have selected the
and press the SEL
Test track in the DAW. Leave the track record-readied.
Test
track, located below the
SOLO
Test track fader is moving.
key
SEL OI]
keys are in default mode. If any buttons are lit,
key in the channel controlling the
track, located above
CUT
CUT button. You will
button will light and the
Test track in the
Test track