Mon Soft Keys; Meters Soft Keys - Solid State Logic Matrix2 Delta Owner's Manual

Mon Soft Keys

Mon
The menu allows you to cut or solo individual monitor outputs in your 5.1 setup. By default, pressing any of the
Centre, Right, LSurr, RSurr, Sub
the buttons from Cut to Solo mode. The
also changes the MIX, REC and MON meters on the meterbridge from 3 stereo meters to a single 5.1 meter.

Meters Soft Keys

Meters
The QIRY MR XLI 770 WSJX OI]W MW YWIH XS GSR½KYVI XLI EREPSKYI GLERRIP QIXIVW 3RGI XLMW QIRY LEW FIIR WIPIGXIH XLI
eight lower buttons in the soft key area are in three groups: buttons 1 and 2 prevent the meters from following the console's
Focus mode by locking them to either the analogue or DAW signals, buttons 3 and 4 provide peak hold options, and buttons 5
to 8 provide meter source options for analogue metering. All buttons cancel out other selections made within that group, and
can be returned to their default state by pressing the currently selected option:
2SXI XLEX EHHMXMSREP QIXIV STXMSRW EVI EZEMPEFPI MR XLI 770 1MWG QIRY 7II 4EKI  for details
2SXI XLEX [LIR QIXIVMRK (%; XVEGOW XLI QIXIVMRK MW GSR½KYVIH ERH GSRXVSPPIH F] XLI (%; RSX XLI 770 WSJX OI]W 8LI
(%; GSRXVSP WYVJEGI HSGYQIRXEXMSR [MPP TVSZMHI HIXEMPW SR LS[ XS GPIEV SZIVPSEH MRHMGEXSVW ERH LS[ XS IREFPI TIEO LSPH
STXMSRW
Focus Options
By default, the meters follow the console's Focus mode, displaying the analogue channel levels in Analogue Focus mode, and the
levels in the DAW tracks in DAW Focus mode. Pressing
DAW
pressing causes the meters to stay with the DAW track levels, regardless of the console's Focus mode.
Peak Hold Options:
Peak Hold is where the top segment lit by any momentary peak levels remains lit once the level drops. By default, the meters do
not have a peak hold. Pressing
can be reset by cancelling the
Meter Source Options:
There are four source options for the channel meters:
(DAW return pre-gain), and
buttons will cut the relevant output. Pressing the
Mtr5.1
button switches between 5.1 and stereo monitor outputs. The
Peak
introduces a 3 second peak hold, and pressing
Hold
button.
Post
(post fader).
Analog
causes the meters to stay with the analogue channel levels, and
CHIP
(channel input post-gain),
Chapter 3 - Analogue Signal Flow
Solo
FYXXSR ½VWX [MPP GLERKI XLI JYRGXMSR SJ
Hold
MRXVSHYGIW ER MR½RMXI TIEO LSPH [LMGL
CHOP
(channel output), DAW
Matrix 2 Owner's Manual
Left,
Mtr5.1
button
Return
46