Editing Transport And Utility Button Assignments - Solid State Logic Matrix2 Delta Owner's Manual

Editing Transport and Utility Button Assignments

In addition to the main 16 soft keys, the function of 18 other buttons and the two foot switch inputs can be edited, increasing
the total number of assignable soft keys within the four layers to 380. This is likely to be useful if you are using DAW packages
[LMGL HS RSX LEZI WYMXEFPI IUYMZEPIRXW JSV GIVXEMR JYRGXMSRW YWIH MR XLI 4VS 8SSPW 0SKMG SV 2YIRHS'YFEWI 4VS½PIW -X QE] EPWS
be that the way you work means that there are some controls which you never use and other functions which would be more
usefully accessed from those buttons.
The 18 buttons which are editable in this way are:
- The ten buttons above the main transport controls, the top left of which is labelled PREVIOUS,
- The six right-most utility buttons located above them, the top left of which is labelled SHIFT,
- The SAVE and UNDO
2SXI 8LI JYRGXMSRW EWWMKRIH XS XLIWI FYXXSRW MR XLI WXERHEVH 4VS½PIW EVI HIWGVMFIH SR 4EKIW and 
To edit these button assignments, press the
in the DAW tab, bringing up a representational display of these buttons:
The buttons in the tab are distinguished by the Matrix console labels above each button. The current button assignments are
indicated below each button. If the button is currently unassigned, the label below the button will consist of six dashes.
These buttons are assigned in exactly the same way as the normal soft keys.
2SXI XLEX 8VERWTSVX ERH 9XMPMX] OI]W GERRSX FI EWWMKRIH XS FI 1IRY WIPIGXSVW
buttons located above and to the right of the main soft key area.
Transport/Utility
Chapter 6 - DAW and CC Configuration
radio button at the right-hand end of the
Matrix
Soft Key Set
115
2 Owner's Manual
row