Solid State Logic Matrix2 Delta Owner's Manual page 82

Chapter 4 - Matrix Remote
Copying and Swapping Data Between Channels
It is possible to copy the settings of one channel onto another channel, or to swap the settings of two channels with each other.
To perform either of these functions, press the
To copy a channel's settings to another channel, select the channel you want to copy in the left-hand
the channel to which you want to copy these settings in the right-hand
To swap a channel's settings with another channel, select one of the channels in the
Destination TR column, and press Swap.
Once you have made all of the copies and swaps you need to make, press
Manually reset switches and pots will now need to be reset. Automatically reset switches and faders can now be reset using either
the Set TR to All Chans
74
Matrix 2 Owner's Manual
Copy/Swap TR Data
or Set TR to Chan buttons.
button to produce the following pop-up:
Destination TR column, and press Copy.
Source TR
OK to close the pop-up.
Source TR column, select
column and the other in the