Maintenance Applications - Nortel 1000E Maintenance Manual

Page 52 of 162 Software maintenance tools

Maintenance applications

553-3041-500 Standard 1.00
— an Alarm Notification
— a PC Event Log and Viewer
• OTM maintenance applications
CS 1000E systems have over 600 overlay-based maintenance commands that
support their powerful capabilities. To maintain a CS 1000E system using
system terminals, the user must remember (or look up) which overlay has the
appropriate commands and the syntax of each command.
OTM enables a certain subset of the overlay functions to be performed for
maintenance of the Call Server, MG 1000Es, MG 1000T Core and
Expansions, Signaling Servers, and Voice Gateway Media Cards.
Note: There are two versions of the OTM Maintenance applications:
Maintenance Windows (windows based) and Maintenance Pages (web
based). Both provide the same functionality.
With OTM Maintenance Windows, there are 37 Maintenance Overlays
grouped into hardware-related windows to allow users to perform all the
maintenance tasks without having to remember or look up any overlay-based
commands. The OTM interface provides a comprehensive view of the
CS 1000E system hardware configuration with the following benefits:
• See the equipped hardware quickly. The hardware list works like a
spreadsheet data view. Users can scroll through the list, sort the list, and
select items for changing.
• Select an item from the list and apply a Maintenance command from the
right-mouse button pop-up menu.
• Print the list or copy it to a spreadsheet.
• Select a TN or DN and print the TN/DN block.
• See enabled/disabled status in real time.
Note: In OTM, the CS 1000E system appears as a CS 1000M MG
system, and the MG 1000T appears as a CS 1000S system.
September 2004