Nortel 1000E Maintenance Manual page 142

Page 142 of 162
553-3041-500 Standard 1.00
Media Card maintenance
Table 28
Media Card faceplate maintenance display codes (Part 2 of 2)
Corresponding
Normal code
T:19
T:20
T:21
T:22
If the IXP encounters any failures during its initialization, an H:XX error code
is displayed. Table 29 shows the list of error codes:
Table 29
List of error codes for the Media Card
Code
H:00
H:01
H:02
H:04
H:08
H:10
H:20
H:40
H:80
September 2004
Fault code Message
F:19 Not used at present
F:20 Waiting for application start-up
message from Host processor
F:21 CardLAN enabled, waiting for
request configuration message
F:22 CardLAN operational, A07 enabled,
display now under host control
Description
Host Processor not booting
SDRAM test failure
SRAM test failure
PCMCIA device failure
Network interface failure
CS 1000E
interface failure
DSP interface failure
NVRAM/EEPROM interface failure
PCM connector failure