Nortel 1000E Maintenance Manual page 143

Media Card error messages
Table 30
Critical ITG Error messages (Part 1 of 3)
Maintenance
Display
G000
G001
G002
G003
G004
G005
G006
When an error or specific event occurs, SNMP sends an alarm trap to OTM
or any SNMP manager that is configured in the SNMP Manager's list in the
ITG Card properties. It also puts the system error message into the error log
file containing error messages.
You can view the error log in OTM IP Line 3.0 application by clicking the
Open Log File button on the Maintenance tab of the ITG Card Properties.
You can also view the log file in any text browser after uploading it to an FTP
host using the LogFilePut command.
Error messages with a severity category of "Critical" are displayed on the
maintenance faceplate in the form: "
three digits of the ITG or ITS message. Table 30 lists the critical ITG
messages and Table 31 on page 146 lists the critical ITS messages.
For a complete listing of other error messages, see Software Input/Output:
System Messages (553-3001-411).
Corresponding Critical
Error Message
ITG1000
ITG1001
ITG1002
ITG1003
ITG1004
ITG1005
ITG1006
Media Card maintenance
" or "Sxxx", where xxx is the last
Gxxx
Description
Card (re)booted.
Task spawn failure <name>.
Memory allocation failure.
File IO error <operation> <object> <errno>
<errtext>.
Network IO error <operation> <object> <errno>
<errtext>.
Message queue error <operation> <object>
<errno> <errtext>.
Unexpected state encountered <file> <line>
<state>.
Communication Server 1000E
Page 143 of 162
Maintenance