Nortel 1000E Maintenance Manual page 31

• faceplate displays
• enable/disable switches
Self-tests
A self-test checks to see that a card is working correctly. Many cards perform
a self-test on power-up. The software commands Disable and Enable force a
card to self-test. The results of a self-test generally show whether or not there
is a problem with the card.
NT4N64 CP PII Call Processor features
Buttons on the CP PII Call processor card allow the administrator to initialize
and reset the system.
Initialize button
The manual initialize (Init) button associated with the active Call Server starts
the Initialize program. The Initialize program can clear some equipment
faults. It then rebuilds call-dependent data and generates system messages
indicating the status of the system. This process is called an initialization.
Reset button
The Reset button allows the user to manually activate the System Loader
program. The System Loader initiates call processing and starts
Hardware maintenance tools
CAUTION — SERVICE INTERRUPTION
Call processing is briefly interrupted during an
initialization.
Communication Server 1000E
Page 31 of 162
Maintenance