Nortel 1000E Maintenance Manual page 25

Note: The SPRE code is typically 1, which means the user typically
enters 191.
3 To check for busy tone, enter Return (##)
• If there is no busy tone, go to step 4.
• If there is a busy tone, a program is active. To end an active program
and access the system, enter four asterisks (****).
4 Load a program by entering 53#xx## (where xx represents the number
of the program).
5 Perform tasks.
6 Press the release key to return the telephone to call processing mode.
Background routines are then loaded automatically.
Communicating with the system
End of Procedure
Communication Server 1000E
Page 25 of 162
Maintenance