Nortel 1000E Maintenance Manual page 53

Software maintenance tools Page 53 of 162
Maintenance Windows applications
The OTM Maintenance Windows include the following:
SSC
The Small System Controller (SSC) window displays the status of the Media
Gateway SSC cards. Users perform actions and tasks on the SSC cards in the
SSC window.
I/O Ports
The I/O (Input/Output) Ports window displays the status of I/O ports on the
system and allows users to execute actions and tasks on a selected port.
Network Loops
The Network Loops window lists the network loops on the system. It allows
users to execute actions and tasks on a selected loop by choosing commands
from the Maintenance menu.
PE Cards
The PE Cards window displays the status of all Intelligent Peripheral
Equipment (IPE)-type cards associated with each Media Gateway on the
system and allows users to execute actions and tasks on a selected card.
PE Units
The PE Units window displays information for PE units and Directory
Numbers (DN) on the system and allows users to execute actions and tasks
on a selected unit.
B- and D-channels
On the MG 1000T, the PRI/PRI2 B- and D-channels window displays the B-
and D-channels on the selected digital trunk (for example, PRI loop) and
allows users to execute actions and tasks on a selected channel.
For detailed information on each Maintenance Windows function, see the
Maintenance Applications chapter in Optivity Telephony Manager: System
Administration (553-3001-330).
Communication Server 1000E Maintenance