Configuration: Administration - Funkwerk artem ComPoint Butterfly Manual

Configuration: Administration

5-20
The Administration page contains the following items:
• Reboot
Here, you can reboot the ComPoint. This function is helpful after you
have made many configuration changes, for instance, and want to
activate these changes.
• Reset Configuration
Resetting the configuration makes sense if you do not wish to reset all
configuration data to the factory default state.
Note:
If you use the Reset Configuration option, the following parameters
will not be reset: password, IP settings, and node name.
• Reset to Factory Default
Resets all ComPoint configuration data to the factory default state.
The ComPoint in the AC Mode