Funkwerk artem ComPoint Butterfly Manual page 85

The ComPoint in the AC Mode
1. If you want to activate the changes, click Save.
To activate the changes, the ComPoint has to be rebooted. The
reboot process takes a few seconds; subsequently, the ComPoint
will be ready for operation again.
You are requested to perform the reboot via the following mes-
sage:
2. Click Reboot.
A message informs you once again that a reboot will terminate all
existing connections and browser sessions.
3. Confirm with OK.
4. To make further settings, log on again at the ComPoint
after the reboot process.
Note:
The restart of the ComPoint is not displayed on your computer
screen. With the help of the LEDs of your ComPoint, however,
you can check the radio activity, the radio status, and the Ethernet
activity.
5-11