The Artem Compoint Manager - Funkwerk artem ComPoint Butterfly Manual

The artem ComPoint Manager

The artem ComPoint Manager
2
This chapter describes additional configuration options for the
artem ComPoint Manager, which go beyond the basic configura-
tion:
The basic configuration comprises the following settings:
• Entering the name
• Entering the IP address
• Entering the netmask
• Entering the standard gateway
Further configurations which can be performed via the artem
ComPoint Manager are:
• Setting up a Telnet connection (not with CPI, CPW, CPB)
• Setting up a web connection
• Firmware upgrading
• Restart (restarting the device)
• Resetting the device to the factory default settings
• Saving/loading/resetting the configuration
• Password change
• Calling up the software version
• Calling up hardware information
Prerequisite:
The PC which you use to configure your device must be installed
in the same network as the device to be configured.
Working with the ComPoint Manager
• The computer has to be provided with a working and sensibly config-
ured TCP/IP stack.
• If the router does not forward multicasts, the search function is lim-
ited to the subnetwork of the PC where the ComPoint Manager is
installed.
• The device can only be configured via a password.
2-1