Funkwerk artem ComPoint Butterfly Manual page 46

Resetting the Device to the Factory Defaults
Restart the Device
How to Terminate the ComPoint Manager
2-20
Note:
The complete configuration of the device is reset to the factory
defaults, including the password and the IP settings.
1. To cancel configurations made and to reset the device to
the factory defaults, select Configuration > Factory default.
The device will be automatically restarted.
Note:
If you do not want to reset the password and the IP settings, select
the Configuration > Configuration reset option.
1. Select Configuration > Restart to restart the device.
1. Select Devices > Exit to exit the ComPoint Manager.
The artem ComPoint Manager