Changing The Password; Setting The Network Name - Funkwerk artem ComPoint Butterfly Manual

The Basic Configuration

Changing the Password

Setting the Network Name

Your ComPoint can now be addressed with its IP address over the
Ethernet via a web browser and/or via Telnet and can be config-
ured.
The Main Parameters
The following chapter introduces the main parameters of the
ComPoint configuration and briefly illustrates them. That way,
you will gain an insight into the configuration options of the
ComPoint.
To prevent unauthorized access, you should change the password
as soon as possible. You can find a detailed description of the AP
mode in Section Configuration: Administration, Page
the AC mode in Section Configuration: Administration,
Page 5–20. Moreover, you can find detailed information in
tion Password Change, Page
In contrast to LANs configured via Ethernet, a wireless LAN does
not provide cabling to permit a permanent connection between
server and clients. This is why malfunctions or access violations
can occur in directly adjacent wireless networks.
In order to prevent this, there is a parameter comparable to a
domain name in each wireless network which clearly identifies the
network. Only clients whose network configuration matches that
of the ComPoint can communicate in this WLAN. You can find
further information in
Page 4–10.
2–12.
Section Configuration: Wireless,
4–22, of
Sec-
1-17