Configuration: Wds - Funkwerk artem ComPoint Butterfly Manual

The ComPoint in the AP Mode

Configuration: WDS

length of 12 characters and have to be hexadecimal, e.g.:
0001CDACEF00
If you want to activate the settings you have made, confirm this by
clicking Save. Otherwise, you can discard the changes by clicking
Cancel.
In addition to the individual clients, you can also integrate other
access points into the wireless cell of a ComPoint. This permits
simultaneous bridging between maximally 6 ComPoints. This fea-
ture is called WDS—Wireless Distribution System.
To enable WDS, enter the MAC address of the access point to be
integrated into the wireless cell of the ComPoint on the Configu-
ration > WDS page.
4-19