Funkwerk artem ComPoint Butterfly Manual page 40

How to Upgrade the Firmware
2-14
Caution:
During the firmware upgrade, you must neither turn off the
device nor interrupt the data connection. Otherwise, the software
installed in the device will be damaged. You will then have to
return the device to the vendor.
1. Before upgrading, make sure that the new firmware ver-
sion (files ending with *.afw) is available on your hard disk
or on another data carrier.
2. Under Extras > Password, enter the password of the admin-
istrator user level if this has not been done yet. Otherwise,
an update will not be possible.
3. In the main window of the ComPoint Manager, select the
device which you want to upgrade and select Configuration
> Firmware upload... Alternatively, you can use the firm-
ware upgrade option Fw in the toolbar.
4. In the new dialog box, click the Firmware browser... button.
The artem ComPoint Manager