Funkwerk artem ComPoint Butterfly Manual page 92

5-18
Note:
For security reasons, a pass phrase with a minimum length of 20 char-
acters should be selected.
Note:
WPA Enterprise is not supported in the AC mode.
802.1x Configuration
If you use a RADIUS server for authentication, you can configure
the ComPoint AC as the corresponding client.
• Authentication Method
The ComPoint AC supports the EAP-MD5 protocol. If you want to
activate 802.1x authentication, select this protocol from the drop-
down menu.
• User name
Enter the user name which has been specified for the client on the
Radius server.
• Password
Enter the password which has been specified for the client on the
Radius server.
If you want to activate the settings you have made, confirm this by
clicking Save. Otherwise, you can discard the changes by clicking
Cancel. To activate the changes, the ComPoint has to be rebooted.
The ComPoint in the AC Mode