Funkwerk artem ComPoint Butterfly Manual page 19

After Successful Commissioning
Operation of the ComPoint as Multi-Access Client
This operation is possible in the infrastructure or ad-hoc (peer-to-
peer) mode. Several computers are connected to the CPB-AC via
a switch. In this case, NAT (Network Address Translation) is
applied so that all computers can be reached via the MAC address
of the CPB-AC. Therefore, only the IP protocol can be transferred
transparently. If protocols other than IP have to be transferred,
each client has to be operated at a single-access client, since NAT
is only possible for IP for multi-access clients.
Note:
If the connected computers are to be configured via DHCP, the
DHCP server has to reply to their request with a broadcast.
Example:
Switch
CPB-AP
CPB-AC
CPB-AC
Switch
1-11