Funkwerk artem ComPoint Butterfly Manual page 45

The artem ComPoint Manager
How to Define a Multicast Interface
If the PC on which the ComPoint Manager is installed is provided
with various network interfaces, you can determine with which
interface the search for devices is to be performed.
1. To select a multicast interface manually, go to Extras >
Options.
The following dialog box is displayed:
2. Select the IP address of the NIC of your PC which you want
to use as a multicast interface and confirm by clicking OK.
If the multicast interface 0.0.0.0 is defined, the search is
performed via all network interfaces of the PC.
2-19