Funkwerk artem ComPoint Butterfly Manual page 33

The artem ComPoint Manager
How to Add a Device Manually
You can add devices manually if you cannot find them via the dis-
covery function of the ComPoint Manager. This may be the case if
a router is operated between the device and the PC on which the
ComPoint Manager has been installed and if this router does not
forward the group address of the artem discovery protocol
(239.239.239.239).
1. Select Devices > Insert.
A dialog box is opened in which you can enter the IP
address of the new device.
2. Confirm the entry by clicking the OK button.
The manually added device will now be added to the list displayed
in the main window. In the State column, the discovered (IP) entry
is displayed.
2-7