Funkwerk artem ComPoint Butterfly Manual page 21

After Successful Commissioning
Extension of the Range
If you wish to connect remote areas and require a wireless cell
there, as well, you can also operate a CPB-AP at a CPB-AC. In this
case, it has to be ensured that the second wireless cell is operated
on another channel, if possible.
Note:
Here, up to 16 devices can be administrated behind the AC.
Also refer to Section
Example 1:
CPB-AP
Switch
WLAN 1
Channel 1
A further option is the use of the WDS, Wireless Distribution Sys-
tem. Here, a port to a further ComPoint is used to set up a connec-
tion between the ComPoints. Up to 6 of these ports can be config-
ured to the other access points per ComPoint.
Configuration: Wireless
CPB-AC
Switch
CPB-AC
on Page 5–12.
CPB-AP
WLAN 2
Channel 11
1-13