The Functions Of The Compoint Manager - Funkwerk artem ComPoint Butterfly Manual

The Functions of the ComPoint Manager

Searching for Available Devices
2-4
You can configure search options via the Extras > Options dialog
box.
• If you check the Enable extended view option, the main window is
extended by the Application, Product name, and Version columns.
• If you want to repeat the discovery process automatically, check the
Enable automatic discovery option. Under Retry discover after, you can
select values from 10 to 60 seconds. After the expiration of this time
interval, the ComPoint Manager will automatically restart the discov-
ery process.
• If you want the ComPoint Manager only to update the parameters for
the devices already found during the search, select the Ignore new dis-
covered devices option. In this case, the ComPoint Manager will not
search for new devices. This option is helpful if a very large number of
devices is operated in the network.
• You can abort the discovery process after a defined time interval. In
small networks with only a few devices, for instance, you can reduce
this time span to 3 seconds. The maximum value is 10 seconds.
The artem ComPoint Manager