Funkwerk artem ComPoint Butterfly Manual page 44

2-18
9. As soon as the firmware upgrade has been finished success-
fully, the following dialog box appears:
You can choose between a simple restart of the device, a
restart with a simultaneous reset of the configuration to
the factory defaults, or a restart at a later point of time.
Note:
The ComPoint Manager has already selected the option
you require. If the Restart immediately (recommended)
option is activated, you can also check the Reset configura-
tion and restart. option to reset the device to the factory
default settings.
Caution!
If the ComPoint Manager proposes the Reset configuration
and restart option, you must never select the Restart imme-
diately (recommended) option.
10. To restart the device, confirm by clicking OK.
Note:
The restart of the device is not displayed on your computer screen.
With the help of the LEDs of your device, however, you can check
the radio activity, the radio status, and the Ethernet activity.
11. Finally, check the operability of the device, for instance by
searching for devices installed in the network via the
ComPoint Manager.
The artem ComPoint Manager